专注于自动化焊割设备制造
浏览数量： 0 作者： 本站编辑 发布时间： 2025-10-30 来源： 本站
单模块 MFSC-6000W-50um 切割数据
Single Module MFSC-6000W-50um Cutting Data
八、单模块 MFSC-6000W 切割数据 Single Module MFSC-6000W Cutting Data
8.1 MFSC-6000W 一体化 QBH 输 出纤芯 50 μ m 切割数据（准直 100mm/聚焦 200mm ） MFSC-6000W integrated QBH output core 50μm cutting data (collimation 100mm/ focus
200mm)
MFSC-6000W 连续激光器（50μm）MFSC-6000W Continues Laser(50μm) | |||||||||
材料Material |
厚度 thicknes (mm) |
速度Speed (m/min) |
功率 Power (W) |
气体Gas |
气压 Pressure( bar) |
喷嘴Nozzles (mm) | 焦点位置 Focus Point (mm) | 切割高度 Cutting Height (mm) |
备注Remark |
碳钢Carbon Steel | 1 | 60-80 |
6000 |
N2/
Air | 8 | 2.0 | 0 | 0.6 |
1 |
2 | 50-60 | 8 | 3.0 | -0.5 | 0.5 | ||||
3 | 23-28 | 8 | 3.0 | -1.5 | 0.5 | ||||
4 | 17-20 | 10 | 3.0 | -3 | 0.5 | ||||
5 | 10-14 | 10 | 3.5 | -3.5 | 0.5 | ||||
6 | 8-12 | 12 | 3.5 | -4 | 0.5 | ||||
3 | 3.6-4.5 | 4000 |
O2 | 0.6 | 1.0 | +6.5 | 0.6 |
2 | |
4 | 3.5-4.0 | 4000 | 0.6 | 1.0 | +6.5 | 0.6 | |||
5 | 2.8-3.0 | 4000 | 0.6 | 1.0 | +6 | 0.6 | |||
6 | 2.6-2.8 | 4000 | 0.6 | 1.0 | +6 | 0.6 | |||
8 | 2.2-2.6 | 5000 | 0.6 | 1.2 | +6 | 0.6 | |||
10 | 2.0-2.2 | 6000 | 0.6 | 1.2 | +7 | 0.6 | |||
12 | 1.8-2.0 | 6000 | 0.6 | 1.2 | +9 | 0.6 | |||
14 | 1.4-1.6 | 6000 | 0.5 | 1.4 | +12 | 0.6 | |||
16 | 1.0-1.3 | 6000 | 0.6 | 双 1.4 | +14 | 0.3 | |||
18 | 0.8-1. 1 | 6000 | 0.6 | 单 1.6 | +14 | 0.3 | |||
20 | 0.6-1.0 | 6000 | 0.6 | 单 1.6 | +15 | 0.3 | |||
22 | 0.55-0.6 | 6000 | 0.65 | 单 1.6 | +15 | 0.3 | |||
5 | |||||||||
25 | 0.5-0.6 | 6000 | 0.8 | 单 1.7 | +16 | 0.3 | |||
30 | 0.4-0.5 | 6000 | 0.8 | 单 1.7 | +18 | 0.3 | |||
35 | 0.3-0.4 | 6000 | 1 | 单 1.7 | +19 | 0.3 | |||
40 | 0.2-0.3 | 6000 | 1 | 单 1.7 | +19 | 0.3 | |||
不锈钢Stainless Steel | 1 | 50-60 |
6000 |
N2 | 8 | 2.0 | 0 | 0.6 | |
2 | 30-40 | 8 | 3.0 | 0 | 0.5 | ||||
3 | 25-30 | 8 | 3.0 | -1 | 0.5 | ||||
4 | 20-21 | 8 | 3.0 | -2 | 0.5 | ||||
5 | 13-15 | 8 | 3.0 | -1.5 | 0.5 | ||||
6 | 10-12 | 8 | 4.0 | -2 | 0.5 | ||||
8 | 7.0-8.0 | 8 | 5.0 | -4 | 0.5 | ||||
10 | 2.5-3.0 | 16 | 4.5 | -7.5 | 0.5 | ||||
12 | 1.5-2.0 | 16 | 4.5 | -8 | 0.5 | ||||
14 | 1.0-1.3 | 16 | 4.5 | -10 | 0.5 | ||||
16 | 0.8-1.0 | 18 | 4.5 | -11.5 | 0.5 | ||||
18 | 0.6-0.7 | 18 | 5.0 | -12.5 | 0.5 | ||||
20 | 0.5-0.65 | 18 | 5.0 | -13 | 0.5 | ||||
22 | 0.4-0.5 | 20 | 6.0 | -13 | 0.5 | ||||
25 | 0.15-0.2 | 25 | 6.0 | 6 | 0.5 | ||||
35 | 0. 1 | 25 | 6.0 | 6 | 0.5 | ||||
铝合金Aluminiu m Alloy | 1 | 60-80 |
6000 |
N2 | 10 | 2.0 | 0 | 0.6 | |
2 | 55-60 | 10 | 3.0 | -1 | 0.5 | ||||
3 | 24-28 | 10 | 3.0 | -1 | 0.5 | ||||
4 | 16-19 | 10 | 3.0 | -1.5 | 0.5 | ||||
5 | 12-14 | 10 | 3.5 | -2 | 0.5 | ||||
6 | 10-12 | 10 | 5.0 | -2 | 0.5 | ||||
8 | 3.0-4.0 | 14 | 5.0 | -3 | 0.5 | ||||
10 | 2.0-2.5 | 15 | 5.0 | -3.5 | 0.5 | ||||
12 | 1.4-1.7 | 15 | 5.0 | -4 | 0.5 | ||||
14 | 1.0-1.2 | 18 | 5.0 | -5 （2000 /98） | 0.5 | ||||
16 | 0.8-1.0 | 20 | 5.0 | -6 （2000 /98） | 0.5 | ||||
18 | 0.7-0.9 | 20 | 5.0 | -7 （2000 /98） | 0.5 | ||||
20 | 0.6-0.8 | 20 | 5.0 | -7 （2000 /98） | 0.5 | ||||
黄铜 Brass | 1 | 60-80 |
6000 |
N2 | 10 | 2.0 | 0 | 0.6 | |
2 | 50-60 | 10 | 3.0 | 0 | 0.5 | ||||
3 | 25-30 | 10 | 3.5 | 0 | 0.5 | ||||
4 | 16-20 | 12 | 3.5 | -1.5 | 0.5 | ||||
5 | 12-14 | 14 | 4.0 | -2 | 0.5 | ||||
6 | 8-10 | 14 | 5.0 | -2.5 | 0.5 | ||||
8 | 5.0-7.0 | 16 | 4.0 | -3 | 0.5 | ||||
10 | 2.0-2.5 | 16 | 4.0 | -3 | 0.5 | ||||
12 | 1.5-1.9 | 16 | 5.0 | -4.5 | 0.5 | ||||
16 | 0.5-0.8 | 20 | 5.0 | -9 | 0.5 | ||||
20 | 0.1-0.2 | 20 | 5.0 | -10 | 0.5 | ||||
紫铜Copper | 1 | 50-60 |
6000 |
O2 | 10 | 3.0 | -1 | 0.5 |
3 |
2 | 30-36 | 10 | 3.0 | -1 | 0.5 | ||||
3 | 15-18 | 12 | 3.0 | -2 | 0.5 | ||||
4 | 8-10 | 12 | 3.5 | -3 | 0.5 | ||||
5 | 6.0-7.0 | 13 | 4.5 | -4 | 0.5 | ||||
6 | 4.0-5.0 | 14 | 5.0 | -5 | 0.5 | ||||
8 | 1.5-1.8 | 14 | 5.0 | -5 | 0.5 | ||||
10 | 0.8-1.2 | 14 | 5.0 | -6 | 0.5 | ||||
备注 1：碳钢 1-6mm 推荐使用空气或氮气切割，切割速度比用氧气的更快，会有轻微挂渣。备注 2:根据现场气体纯度、板材质量等方面的不同，调试所使用的功率以及调试的速度也会有所不同。备注 3：紫铜需
使用高压氧气切割，使用其他气体切割可能会有损坏激光器得风险。备注：表中红标参数为打样参数，在实际加工中受各类因素影响较大，仅适合小批量生产，不推荐大批量生产加工，建议使用更高功率激光器。
Remark: Carbon steel and stainless steel, such as air, nitrogen cutting, efficiency and stability will be improved, bearing the increase of thickness, but also prone to hanging slag phenomenon, the above data parameters in actual bulk cutting, machine tool, system, cutting head, air pressure, materials and other factors, there may be changes, the data in the table red mark parameters for proofing, greatly influenced by various factors in the actual processing, It is only suitable for small batch production. Mass production is not recommended. Higher power lasers are recommended. Copper needs to be cut with high pressure oxygen, air or nitrogen are easy to cause damage to the laser.
8.2 单模块 MFSC-6000W 纤 芯 50 μ m 穿孔参考 Single Module MFSC-6000W 50μm Perforation Reference
8.2.2 创鑫 MFSC-6000W 25mm 碳钢穿孔参数（仅供参考）MAX MFSC-6000W 25mm carbon
steel perforation parameters (for reference only)
阶段 stage |
功率 Power (W) |
占空比duty ratio (%) |
频率Freque ncy (Hz) | 喷嘴高度 Nozzles Height (mm) | 气压 Air Pressur e (bar) |
焦点 Focus Point (mm) |
穿孔时间Aperture Time (ms) |
停光吹气 Stop blowing (ms) |
高位 High-positio n | 6000 | 50 | 100 | 20 | 0.6 | -4 | 200 | |
中位 Middle-posit ion | 6000 | 45 | 100 | 12 | 0.6 | -6 | 1500 | |
低位 Low-positio n | 6000 | 45 | 300 | 8 | 0.7 | -10 | 1000 |
8.2.2 创鑫MFSC-6000W 20mm 不锈钢氮气穿孔参数（仅供参考）
阶段stage |
功率 Power (W) |
占空比duty ratio (%) |
频率Freque ncy (Hz) |
喷嘴高度Nozzles Height (mm) | 气压 Air Pressu re (bar) |
焦点 Focus Point (mm) |
穿孔时间Aperture Time (ms) |
停光吹气 Stop blowing (ms) |
高位High-p osition | 6000 | 55 | 3000 | 20 | 10 | -8 | 200 | |
中位Middle -positio n | 6000 | 45 | 2500 | 12 | 10 | -12 | 1500 | |
低位Low-po sition | 6000 | 45 | 2000 | 8 | 10 | -16 | 1000 |
